The whole-album afternoon
Afternoon light, a sleeve propped against the wall, the needle dropping on side two. The teak top keeps the platter dead level through the whole record.
Timber Vintique
Best seller
Handcrafted Record Stand Artisan Living Room Decor
$2,837.69
Details
- Available sizes
- 26"W x 22"H x 14"D32"W x 28"H x 14"D41"W x 35"H x 14"D
- Material
- Solid teak
- Custom sizes
- On request
- Lead time
- About 4 weeks — sometimes 6
Natural grain. Finished by hand.
The form of this record player stand is shaped by natural grain, then its visible wood surfaces are refined and finished by hand.
What is included
Only the wooden record player stand is sold.
Not included: turntables, speakers, records, audio components, cables, and other electronics; loose mounting or installation hardware; other non-wood accessories; decorative objects and styling props.
Details at a glance
- What's sold: wooden record player stand
- Available wood: Teak
-
Available sizes: 26"W x 22"H x 14"D
32"W x 28"H x 14"D
41"W x 35"H x 14"D - Not included: turntables, speakers, records, audio components, cables, and other electronics; loose mounting or installation hardware; other non-wood accessories; decorative objects and styling props
Natural wood, one piece at a time
Wood grain, knots, edge contours, and color naturally vary from piece to piece. Product images show the expected character rather than an identical grain pattern.
General care
These products are not waterproof. Their durable wood-and-finish construction is designed to handle ordinary accidental spills when liquid is wiped up promptly. Avoid standing water, soaking, submersion, and harsh cleaners.
SKU: MPK-RPS-03570-01
Dimensions & assembly
Exact dimensions for each size are listed on the option you select above. Most pieces arrive fully assembled; wall-mounted designs include hardware and a template. Measure doorways and stair turns before ordering — most pieces pass a standard 32-inch doorway.
Care: wipe with a soft, dry cloth and oil the grain once or twice a year to keep the surface nourished.
Shipping & returns
Your piece ships free in a protective wooden crate. Freight delivery comes with a scheduled window and tracking; white-glove service — carried inside, placed, packaging removed — is available at checkout.
Returns: 30 days from payment. Pieces need to be unused and in original condition — we arrange the freight pickup and walk you through repacking. Damaged or defective on arrival? We repair, replace or refund at no cost. Made-to-order pieces can be changed or cancelled while the build has not started.
Still deciding
You may also like
Record Player Stands
Handcrafted Wood Record Player Stand For Entryway
From $3,769.39
Record Player Stands
Farmhouse Record Stand Cozy Living Room Furniture
From $2,310.62
Record Player Stands
Handcrafted Live Edge Record Stand Unique Living Room
From $4,307.60
Record Player Stands
Mid Century Wooden Media Console For Bedroom Furniture
From $3,167.78
The piece
A stand built to the measure of a record collection.
Our designers worked from the LP outward: a dead-flat top for the turntable, storage cut to a record's true height, a clean cube profile that stays out of the music's way. The artisan selects each teak board, joins it wood to wood, and hand-sands every face before oiling.
A cheap MDF stand telegraphs every footstep into the needle and bows under a hundred LPs by its second year. Solid teak does neither: kiln-dried for twenty days before it is cut, the mass damps the skip when someone crosses the room, and the shelf holds its line under the full weight of the collection. Kneel to flip through the records and the whole thing stays dead still.
- Flat, stable top keeps the turntable level
- Shelf sized to full 13-inch LP clearance
- Compact 26-inch width fits beside the sofa
- Holds the amp with room for cables behind
- Solid teak damps footstep vibration
It fits real homes.
Friday warm-up
Work ends, the amp clicks on, and the first record of the weekend gets pulled from the shelf below. The ritual takes thirty seconds and resets the week.
The crate-dig haul
Three new finds from the record fair slide into the row, and the alphabet shifts to make room. The shelf was sized for exactly this kind of growth.
- Available sizes
- 26"W x 22"H x 14"D32"W x 28"H x 14"D41"W x 35"H x 14"D
- Material
- Solid teak
- Doorway fit
- Fits standard 32-inch doorways
- Lead time
- Made to order
Every piece is made to order, and dimensions vary from one to the next. Need a different size for your space? Tell us your measurements and we'll build it to fit.
From the same collection
Pairs well in the room
Wall Arts
Organic Carved Wall Art Sculpture For Living Room
From $1,620.00
Wall Arts
Modern Wavy Wall Art Sculpture For Living Room
From $1,620.00
Wall Arts
Elegant Wave Inspired Wall Sculpture for Modern Living Room
From $2,280.00
Wall Arts
Organic Cloud Wall Sculpture With Layered Design For Bedroom
From $1,700.00
Wall Arts
Modern Wall Art Panel With Wave Design For Living Room
From $2,420.00
Wall Arts
Mountain Wall Art Carving For Living Room And Nature Inspired Home
From $2,140.00
Teak, up close.
Grain that reads quiet
Tight, even grain runs the top and down the cube's sides — the calm figure Danish credenzas traded on for sixty years. Under a 2700K lamp on a Friday night, the low sheen catches the same way those vintage pieces still do.
The finish nature applied
Open the crate and the corner smells faintly sweet and leathery — teak's own oils, not solvent. We hand-rub more into the top and shelf faces, a warm satin under lamplight that never feels like the plastic wrap on a flat-pack unit.
Density you can feel
At roughly 700 kilograms per cubic meter, teak moves about half as much as oak. The top stays dead level for the platter and the mass soaks up footstep vibration — just keep it a couple of feet off a forced-air vent through winter.
Golden now, silver whenever
Indoors the stand never silvers — it deepens toward caramel where lamplight and window sun reach it. A sleeve dragged across the top leaves a mark that fine paper and a wipe of oil erase in ten minutes.
From plank to piece.
The wood selection
Boards are pulled one at a time and matched by tone across the cube. Stock with twist, checks, or dull figure never makes the cut.
The shaping process
The cube is traced from templates and cut slightly proud of the line — leaving material for the handwork on every edge and corner.
The hand refinement
Top and shelf faces are sanded through successive grits until edges feel right against an open palm, not merely look right.
The final inspection
Oil goes on in thin coats, buffed between each. The maker checks level, record clearance, and finish before the stand ships.
One maker follows each piece from rough plank to the final coat of oil, and signs off before it is crated.
The Timber Vintique workshop
No two boards alike
The grain that arrives is yours alone.
- Every board is cut from a different tree — the photos here are a reference, not a promise.
- Your piece is photographed in the workshop before it ships, so you see your exact grain.
- Small knots and mineral streaks come with real wood. We leave them in.
Delivery, done properly.
White-glove option
Choose white-glove and the crew brings the piece inside, places it in the room, and removes every bit of packaging.
Crated for freight
Each piece travels in its own wooden crate with corner protection, built to cross the country without a scuff.
Scheduled window
You get a delivery appointment and tracking — not a truck that shows up unannounced.
Honest returns
30 days from payment. If it isn't right — unused, in original condition — we arrange the freight pickup. Made-to-order terms are stated up front.
Questions customers usually ask
Is it built for a turntable specifically?
Each stand is solid hardwood with a dead-flat, vibration-damping top for the turntable and storage sized to LPs — a full 13-inch clearance, verified before any piece leaves the workshop.
Can it grow with my record collection?
Yes. Stands are built to order, so width grows with your collection — from a 24-inch single-shelf build to a 60-inch run that holds several hundred records plus the amp.
Will the shelves sag under vinyl?
Stands arrive assembled apart from bolt-on legs on some designs. Record weight is the real test: shelves are sized so a full row of vinyl cannot bow them.
How should I care for it?
Dust with a dry cloth, keep the turntable level, and re-oil the top yearly. Route cables through the back openings so nothing saws against a finished edge.
How does a stand arrive?
Each stand is made to order, corner-blocked, and shipped boxed or freight-crated by size. Tracking is included, and larger builds get a scheduled delivery call first.
What are this stand's dimensions, and how many records fit?
The standard cube is 26 inches wide, 22 inches high, and 14 inches deep. The shelf holds roughly 80 to 100 LPs in a single row, with the top clear for a standard turntable.
Made to order
Built for you. Signed by the maker.
From $2,837.69
Pairs well
Complete the room
Pieces that share the room — and the timber.
Shoe Benches
Narrow Shoe Bench Rack Home Decor
From $1,500.00
Shoe Benches
Handmade Entryway Shoe Bench Rack Livingroom Furniture
From $1,500.00
Wood Benches
Modern Handcrafted Wood Bench For Stylish Home Décor
From $1,856.80
Shoe Benches
Custom Wood Bench Wood Farmhouse Shoe Rack Bench Storage
From $1,500.00
Wood Benches
Rustic Handcrafted Wood Bench For Living Room Or Entryway
From $1,416.80
Shoe Benches
Wooden Entryway Shoe Bench With Shelves For Storage
From $1,815.00
Where you left off
Recently viewed
A letter from the workshop
The Workshop Journal
Wood care notes, new pieces, and rooms we've delivered — a short letter, once a month.
Read the journal