News

Record storage dimensions: the shelf height and depth that fit LPs

Record storage dimensions: the shelf height and depth that fit LPs

“The shelves aren't tall enough to fit a vinyl directly straight in and stacked” describes a problem you can catch before checkout. We need the usable opening, not just the cabinet's outside height.

Start with the largest sleeve

A 12-inch disc is not the full size of a sleeved album. Measure your tallest and deepest sleeves, including outer protectors and box sets. Request at least 13 inches clear inside as a starting brief, then test the actual collection.

Separate player space from record space

A request for 18 inches of depth is useful for some equipment, but your player, plugs and ventilation requirements decide the finished depth. Send the equipment manual and a photo with the lid open. Ask where cords exit.

Check support separately

Keep records upright with suitable support. The Library of Congress recommends upright storage and sturdy shelving. Record count is not a load rating: request the approved load for the exact span and installation.

Measure this before you order

Clear internal height, width and depth; player footprint; lid-open envelope; rear plug space. Mark each dimension on a sketch in inches.

Related: Gifting a record stand: how to get the measurements without spoiling the surprise · What a solid wood record stand is made of: pine, oak, walnut and the spec sheet to ask for

Sources

Record storage dimensions: the shelf height and depth that fit LPs
Temporary workshop reference: a record-player stand from our photographed workshop collection. The illustration for this guide is being prepared.

See pieces for this room

WhatsApp us at +1 (213) 807-0211 with your measurements and product link.

Pieces for records and wine

Not sure about size? Message us on WhatsApp →